Clamping and locating angle is used to sustain the work-piece at right angles. It can be installed on the top surface or four sides of the fixture to extend the length of working table. Besides good appearance, high durability, the
supporting angle iron can avoid welding spatters and is hard is hard to distort.
Supporting Angle Iron can be used to locate work-piece, extend working table and support accessories.
|
技术参数（Technical parameter） |
|
1.材质 material：HT300 铸造 casting / Q345 钢 steel / 高硬度钢 High-strength steel |
|
2.孔径 aperture：A=φ 28.065--φ28.149mm / A=φ 16.065--φ16.149mm |
|
3.孔距 hole spacing：L1=50±0.05mm / L1=25±0.05mm |
|
4.垂直度 verticality：0.1/200mm |
|
5.表面粗糙度surface roughness：Ra 3.2 |
|
6.硬度 hardness：材料本体硬度（same as material hardness） |
We have cooperated with experienced shipping forwarders for many years, they arrange the shipment. No matter by express, by air or by sea, we will track the course of the goods all the way, to make sure goods arrive at you on time and in good condition.
Clamping and locating angle is used to sustain the work-piece at right angles. It can be installed on the top surface or four sides of the fixture to extend the length of working table. Besides good appearance, high durability, the
supporting angle iron can avoid welding spatters and is hard is hard to distort.
Supporting Angle Iron can be used to locate work-piece, extend working table and support accessories.
